MEMMERT Steriliser SN30plus

Update Terakhir
10-09-2018
Dilihat Sebanyak
112 kali
Lokasi
DKI Jakarta - Jakarta Pusat - Kemayoran
Harga
Kontak Kami
Bagikan
+ Penawaran

Perhatian!

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi lebih aman.

Spesifikasi MEMMERT Steriliser SN30plus

 

Temperature

Temperature 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value
Set temperature range in °C min. 5°C above ambient up to +250°C
resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C and for actual values 0.1°C (LED)

Control technology

ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT the process time does not start until the set temperature is reached
Calibration three freely selectable temperature values
Language setting German/English/Spanish/French
adjustable parameters temperature (Celsius or Fahrenheit), air flap position, programme time, time zones, summertime/wintertime

Ventilation

natural convection
Fresh air admixture adjustment of pre-heated fresh air admixture by air flap control in 10 % steps for each segment individually
Vent vent connection with restrictor flap

Communication

Documentation programme stored in case of power failure
Programming AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

Safety

Temperature control mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Temperature control overtemperature monitor TWW, protection class 3.1 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY additionally integrated over- and undertemperature monitor "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating is switched off in case of overtemperature
Autodiagnostic system for fault analysis
Alarm visual and acoustic

Standard equipment

Scope of delivery incl. works calibration certificate for +160°C
Door fully insulated stainless steel door with 2-point locking (compression door lock)
Interior easy-to-clean interior,made of stainless steel,reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Internals 1 stainless steel grid

Stainless steel interior

Max. loading of chamber: 60 kg
Dimensions W x H x D in mm w(A) x h(B) x d(C): 400 x 320 x 250 mm
Volume 32 l

Textured stainless steel casing

Housing rear zinc-plated steel
Dimensions w(D) x h(E) x d(F): 585 x 704 x 434 mm

Electrical data

Voltage Electrical load 230 V, 50/60 Hz 
approx. 1600 W
Voltage Electrical load 115 V, 50/60 Hz 
approx. 1600 W

Packing/shipping data

the appliances must be transported upright
Customs tariff number 8419 8998
Country of origin Federal Republic of Germany
WEEE-Reg.-No. DE 66812464
Dimensions approx incl. carton B x H x T: 660 x 890 x 650 mm
Net weight approx. 46 kg
Gross weight carton approx. 62 kg


Untuk Info dan Pemesanan
Hubungi Contact :
(Miska(Mrs.) 085261815780
 sales@andalanbangun.com 
Tampilkan Lebih Banyak

PT. ANDALAN BANGUN SEJAHTERA

Disributor for Laboratory equipment, reagent, glassware, Test & Measuring Instrument.
Tampilkan Lebih Banyak

PT. ANDALAN BANGUN SEJAHTERA

Free Member
 
Jl. Sumur Batu Raya No. 1 Rt.001 Rw.006, Sumur Batu-Kemayoran Jakarta Pusat
DKI Jakarta - Jakarta Pusat
Login Terakhir 15-11-2022
021-42803207
08111980707
08111980702

Produk Lainnya


Rp. 10 / pcs
PT.GLOBAL PRIMA PERKASA
CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan
Rp. 64.800.000 / unit
Mitra Laser
CALL
Alat Uji Lingkungan