FUJI Electric Portaflow C KIT-2 (2" to 48") Ultrasonic Flow Meter

FLOW METER Simple setup and easy installation Sensor options accommodate pipe sizes from 0.5” to 235” Up to 12 hours of continuous use on rechargeable battery Compact and lightweight – just 2.2 lbs Built-in SD memory card slot for easy data transfer Energy (BTU) measurement capable with analog input Large graphic LCD displays rate, velocity, and total simultaneously Loader software allows configuration and real-time monitoring from a PC The Fuji Electric Portaflow-C can be used with various types of detectors applicable for small to large diameter pipe (13mm to 6000mm / 0.5 to 236") and low to high temperature (−40 to +200°C). This flow meter is designed for 12 hours of continuous operation with a built-in battery capable of recharging in 3 hours with the supplied power adapter. A SD memory card allows flow, velocity and total data to be stored for later recall. A universal USB port permits communication with a PC to facilitate configuring the Portaflow-C as well as saving and reading data files. A 4.7 inch color graphic display creates an easy-to-use operator interface. Common applications of the Fuji Portaflow-C ultrasonic flow meter include: backup for an already installed flow meter system water supply and sewage treatment flow measurement systems boilerwater / feedwater supplies cooling water cooling oil deionized water for semiconductor manufacturing This Kit Contains: Fuji Electric Portaflow-C Ultrasonic Flow Meter (FSCS10A1-00) Transducer for 0.5 to 12" Pipes; -40 to 212°F; 2MHz Fuji Electric Velcro Mounting Straps (FSD Velcro Strap) Sonic Coupling Compound (TKUSTTSG) Fuji Electric Sensor Cables for Portaflow-C (FSC Signal Cable) Fuji Electric Signal Cable (TKUSTTCAB) Fuji Electric BNC Connectors (TKUSTTBNCA) Fuji Electric Analog Input/Output Cable (FSC I/O Cable) Fuji Electric Software for Portaflow-C (FSC Software) Fuji Electric USB Cable (FSC USB Cable) Fuji Electric Hard Carrying Case (FSC Hard Case) Fuji Electric AC/DC Power Adapter/Charger (FSC Power Adapter) SD Memory Card 2GB (SD MEMORY CARD 2GB) Fuji Electric Instruction Manual for Portaflow-C (FSC Manual) Specifications: Application:  Uniform liquid in which ultrasonic waves can propagateWater, hot-water, distilled water, alcohol, milk, ethanol, etc Inner pipe diameter: 13mm to φ6000mm (depending on the detector) Fluid temperature: -40 to +200°C (depending on the detector) Flow velocity range: 0 to ±32m/s (±0.3m/s min.) Measurement accuracy: ±1.0% of rate(depending on the flow velocity) Response time: 1 sec. Path: Transit time method (1 Path) Display: Color graphic LCD with back light Analog output signal 4 to 20mA DC (1 point) Analog input signal: 4 to 20mA DC / 1 to 5V DC (2 points) Supply voltage: Built-in battery (In the fully charged condition, 12 hours of continuous operation is possible.) Structure: Waterproof (IP64) Size: 210X120X65mm (without printer) Weight: Approx. 1kg SD memory card: It can be saved almost a year date by attached date standards (256MB) Serial communication: Transmission data (data stored in a SD memory card such as instantaneous value, total value, etc): USB port is used;  Transmission distance: 3 m max. Function:  Damping time constant variable within 0 to 100 sec; Instantaneous value display (10 digits) Various flow rate unit  settable;  Total value display (10 digits) Various flow rate unit settable;  Consumed heat quantity computation;  Self diagnosis (diagnoses battery voltage drop and received  waveform from the sensor);  Flash memory (measurement parameter for pipe, fluid, sensor, etc);  A number of registered sites: 32;  Zero point adjustment (Set zero/Clear available);  Bi-directional flow measurement;  Low flow cut (0 to 5m/s).