BLUE WHITE Sonic Pro S2 Ultrasonic Flow Meter

FLOW METER Features: Selectable Doppler or Transit Time operating mode. Custom quality metric algorithms and DSP technology ensures reliable, high accuracy measurements. Quick and easy clamp-on transducer installation. Proprietary AGC (Automatic Gain Control) algorithm eliminates manual gain adjustment. Tamper Resistant 2-button user interface. Factory configured for easy installation. High quality 320 x 240 pixel QVGA backlit LCD. Data logging to standard SD Card format. Factory configured to three minute time interval triggers. Logs time, date, flow rate and total flow values. 500,000 events with included 32MB SD Card. Isolated 4-20 mA output - factory configured. 0 - 1000Hz Pulse output - factory configured. Optional - Computer connection via RS-232, RS-485, USB, Ethernet. Permits remote access and control of all functions including real-time display, system configuration, data logging, remote data capture and process control functions. Software permits remote internet access through local network set-up. Applications: Sewage Wastewater Pulp & Paper Slurries DI water Discharge water Caustics Chemical Slurries Ground water Food and Beverage Petrochemical Any sound conducting liquid Performance Specifications: Fluid velocity range shall be from 0.25 to 30 feet per second. Nominal pipe sizes shall be from 2.0 inch to 100 inch. Transit time accuracy shall be +/-1% of rate > 1fps, +/- 0.01 fps < 1fps Doppler accuracy shall be +/-2% of rate > 12fps, +/- 0.25 fps < 12fps Operate on any input power from 110 to 250VAC, or 15 to 30 VDC without pre-configuration. Flow sensitivity shall be to 0.001 feet per second (0.0003 meters per second). Display response time shall be user configurable for 0.25, 0.50, 1.0, 2.5, or 5.0 seconds. Flow rate averaging time shall be user configurable for 0.50, 1.0, 2.5, 5.0, or 10.0 seconds. Signal Processing Unit (SPU) Enclosure shall be polyester powder coated aluminum rated NEMA 4X (IP66). Enclosure shall include all hardware required for mounting to a pipe, wall, or panel. Continuous operation at temperatures from 14o F to 140o F (-10o C to 60o C). Display shall be a QVGA backlit LCD and continuously display flow rate and total flow to 10 digits plus exponent to E+32. Display shall indicate currently active operating technology, currently active configuration number, transducer separation distance, 4 bar measurement reliability index, measured fluid sound speed, and process control relay status. Two button touch pad shall permit the user to reset the accumulated total value and to swap the rate/total display fonts. The configuration menus shall not be accessible from the front panel. Display languages of English, Spanish, French and German shall be user selectable. Five pre-set pipe configurations may be user configured. Automatic gain control shall adjust the signal strength. User adjustable signal strength shall not be required. Includes: Hard sided case; the Ultrasonic Flowmeter; a CD with instructional manuals in English, Spanish, French and German; all necessary transducer and enclosure mounting hardware; two sets of transducer acoustic mounting gaskets, one for temporary installations and one for permanent installations.