MEGGER MIT220 Insulation & Continuity Tester

HEAT INSULATION Features: Test Voltage: 250 V / 500 V Insulation testing to 1000 M-ohm Continuity testing at 200 mA down to 0.01 ohms Live circuit warning (voltage display) and test inhibit Digital/Analog display Alkaline or rechargeable batteries –10ºC to +55ºC operating temperature CATIII 600 V Conforms to EN61557-1 The MIT200 is one of the smallest insulation testers available on the market today. With options of one, two and three voltage test voltage instruments, the MIT200 instruments offer a range of safety and operation features. The display offers a combination of digital readout and analog display, using Megger’s patented DART display technology, which includes the benefits of an LCD display, such as robust, clear and accurate measurement, with an analog pointer response for evaluating circuit charge and discharge characteristics. The instrument housing is in tough ABS, designed to withstand the rigours of hard use, and is small enough to drop into your pocket when not in use. Battery requirements are 6 AA batteries of either standard alkaline or nickel metal hydride (NiMH) rechargeable type. A low battery warning indicator gives advanced warning of exhausted batteries. Lead null is possible up to 9.99 ohms of test lead resistance, ensuring the ability to null fused test leads as well as standard leads. Includes: 6220-779 Lead set with prods and clips 5410-419 Carry case Specifications: Insulation Ranges      Nominal Test Voltage:  250 V / 500 V Measuring Ranges:  10 K-ohm - 1000 M-ohm on all ranges Terminal Voltage on open Circuit:  -0% +25% of rated voltage Short Circuit Current: 2mA, 1mA - 10mA Test Current On Load:  >1 mA at minimum pass values of insulation Accuracy:   ±3% of reading ±2 digits up to 10 M-ohm; ±5% of reading ±2 digits up to 100 M-ohm;  ±30% of reading up to 1000 M-ohm Continuity Ranges      Measuring Range:   0.01 ohms to 100.0 ohms (0 - 50 ohms on analog scale) Accuracy:  ±0.01 ohms to 9.99 ohms; ±3%;  ±2 digits 10.0 ohms to 99.9 ohms ±5%; ±2 digits Open Circuit Voltage: 5V ±1V Test Current:  205 mA, ±5 mA @ (0 - 10 ohms) > 20mA up to 100 ohms Zero Offset Adjust:     0 to 9.99 ohms General      Power Supply:  6 x 1.5 V Alkaline cells IEC LR6 type Battery Life:  Typically up to 3500, 5 second tests Operating Temperature:  -10ºC to 55ºC Operating Humidity:  93% Relative Humidity at 40ºC max Storage Temperature:  -25ºC to 65ºC Dimensions: 195mm (L) x 98mm (D) x 40mm (H) Weight: 550g