HANNA HI93414 Turbidity and Chlorine Meter

Update Terakhir
17-11-2019
Dilihat Sebanyak
1 kali
Lokasi
Sumatera Utara - Medan
Harga
Kontak Kami
Bagikan
+ Penawaran

Perhatian!

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi lebih aman.

Spesifikasi HANNA HI93414 Turbidity and Chlorine Meter

TURBIDITY METER The HI93414 is a high accuracy Turbidity and Chlorine Portable Meter. This meter is a combination of a nephelometer and photometer to measure the most important parameters in drinking water: turbidity and chlorine. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards and NIST traceable secondary chlorine standards used for calibration and performance verification. The HI93414 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements.The chlorine measurements are are adapted EPA Method 330.5 and Standard Method 4500-Cl G. Features : Three Measurement Modes – The HI93414 features three options for measurement including ratio mode for turbidity, free chlorine, and total chlorine. Turbidity measurements can be made in the 0.00 to 1000 NTU (Nephelometric Turbidity Units) range, while free or total chlorine measurements can be made in the 0.00 to 5.00 mg/L (ppm) range Multiple reading modes – Normal measurement, continuous measurement, or signal averaging measurement are reading modes available EPA Compliant –  The HI93414 meets and exceeds the requirements of EPA and Standard Methods both for turbidity and colorimetric chlorine measurements. When the meter is in EPA mode all turbidity readings are rounded accordingly to meet reporting requirements Calibration – A two, three, or four-point turbidity calibration can be performed by using the supplied (<0.1, 15, 100, and 750 NTU) standards. Calibration points can be modified if user-prepared standards are used. For free and total chlorine, the 1.00 mg/L (ppm) CAL Check™ standard can be used for calibration and performance verification AMCO AEPA-1 Primary Turbidity Standard – The AMCO AEPA-1 supplied standards are recognized as a primary standard by the USEPA. These non-toxic standards are made of styrene divinylbenzene polymer spheres that are uniform in size and density. The standards are reusable and stable with a long shelf life. CAL Check™  – With the powerful CAL Check™ function, reliable performance of the chlorine colorimeter can be validated at any moment by using the exclusive HANNA ready-made, NIST traceable standards.  All standards are supplied with a Certificate of Analysis (COA) for traceability Fast Tracker™  – For advanced ˜field applications, the HI93414 is equipped with Fast Tracker™ – Tag Identi˜fication System (T.I.S.) that makes data collecting and management simpler than ever. Fast Tracker™ allows users to record the time and location of a speci˜fic measurement or series of measurements using iButton® tags near sampling points for quick and easy readings. Each iButton® tag contains a computer chip with a unique identi˜cation code encased in stainless steel GLP Data – The HI93414 features complete GLP (Good Laboratory Practice) functions that allow traceability of the calibration conditions. Data includes calibration points, date, and time Data Logging – Up to 200 measurements can be stored in the internal memory and recalled at any time. Data Transfer – For further storage or analysis options, logged data can be downloaded to a Windows compatible PC using the RS232 or USB ports and the HI92000 software Backlit Display – A backlit LCD display provides an easy to understand, user-friendly interface. Displayed codes guide the user step-by-step through routine operation and calibration The HI98703 is a high accuracy (+0.02 NTU) Turbidity Portable Meter. The meter is supplied complete with AMCO-AEPA-1 primary turbidity standards used for calibration and performance verification. The HI98703 meets and exceeds the requirements of EPA Method 180.1 and Standard Methods for the Examination of Water and Wastewater 2130 B for turbidity measurements. Includes : Sample cuvettes and caps (5) HI98703-11 calibration cuvettes for turbidity HI93414-11 calibration cuvettes for chlorine Silicone oil Cuvette wiping cloth Scissors Batteries AC adapter Instruction manual Rugged carrying case. Specifications : Range : 0.00 to 9.99; 10.0 to 99.9; 100 to 1000 NTU Resolution : 0.01; 0.1; 1 NTU Range Selection : automatic Accuracy : ±2% of reading plus 0.02 NTU Repeatability : ±1% of reading or 0.02 NTU, whichever is greater Stray Light : < 0.02 NTU Light Detector : silicon photocell Method : ratio nephelometric method (90° & 180°) Measuring Mode : normal, average, continuous Turbidity Standards : < 0.1, 15, 100, and 750 NTU Calibration : two, three, or four-point calibration Free and Total Chlorine Range : 0.00 to 5.00 mg/L (ppm) Free and Total Chlorine Resolution : 0.01 mg/L (ppm) from 0.00 to 3.50 mg/L (ppm); 0.10 above 3.50 mg/L (ppm) Log Memory : 200 records Connectivity : USB or RS232 Environment : 0 to 50°C (32 to 122°F), RH max 95% non-condensing Power Supply : 1.5V AA alkaline batteries (4) or AC adapter; auto-off after 15 minutes of non-use Dimensions : 224 x 87 x 77 mm (8.8 x 3.4 x 3.0”) Weight : 512 g (18 oz.).
Tampilkan Lebih Banyak

CV. Gihon Juma Sentosa

CV GIHON JUMA SENTOSA  Sedia peralatant laboratorium & Intrument untuk berbagai keperluan dan kebutuhan dari berbagai merek alat-alat laboratorium berupa: Microbiology, Chemical and Reagent, Laboratory and Scientific Equipment, Medical Equipment, dan Glassware.

Product : HACH, MEMMERT, OHAUS, KETT, KERN, TAKEMURA, EPPENDORF, BOECO, JULABO, CORNING, AXYGEN, PYREX, IWAKI, WHATMAN, SOCOREX, BRAND, IKA, ADVANTEC, DIFCO, MERCK CHEMICAL, SIGMA ALDRICH, DURAN, LOVIBOND, INTERSCIENCE, SEWARD, HETTICH, METTLER TOLEDO, ALL AMERICAN, ATAGO, AZ Instrument, BROOKFIELD, CRITERION, EXTECH, FUNKE GERBER, GEMMY, GFL, GILSON, HANNA, HIRAYAMA, RION, USBECK, GOSSELIN, DAIHAN LABTECH, THERMOSSCEINTIFIC, etc., • GENERAL LAB PRODUCT : BEAKERS - Plastic Beaker - Glass Beaker BOTTLES - Aspirator Bottle - BOD Bottle - Round Bottle - Media Bottle - Reagent Bottle - Sample Bottle - Serum Bottle - Specimen Bottle - Universal Bottle - Wash Bottle CRUCIBLES - Porcelain Crucibles - Silica Crucibles - Platinum
 
Untuk lebih lanjut hubungi :
CV Gihon Juma Sentosa
06188369476
081375912389
email:gihonjumasentosa@gmail.com
Tampilkan Lebih Banyak

CV. Gihon Juma Sentosa

Free Member
 
Jalan Jamin Ginting KM 9,5 Gg Pinem no 8 Mangga, Medan Tuntungan, Medan
Sumatera Utara - Medan
Login Terakhir 17-11-2019
06188369476
081375912389

Produk Lainnya


CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan
CALL
Alat Uji Lingkungan