Mesin Manual SHDS 160/50
Spesifikasi Mesin Manual SHDS 160/50
Deskripsi
Packing: Wooden Boxes
Model NO.: SHDS 160/50
Standard: CE, SGS
Trademark: Bada
Origin: Wuxi
Certification: CE
Product Type: Plastic Pipe
Raw Material: HDPE
Automatic: Semiautomatic
Type ( For Injection Machine) : Full-Electric Controlled
Kind: Full-Electric Controlled
Type: Plastic Auxiliary Equipment
Item Name: HDPE Pipe Butt Fusion Welding Machine
SHDS 160/50 Butt fusion machine, Butt fusion welding machine, Butt welding machine, Manual butt welding machine, HDPE pipe welding machine
Application:
Manual butt fusion welding machine is suitable for butt fusion welding of plastic pipes and fittings made of PE, PP, and PVDF in construction site or workshop.
Features:
1. The machine body is equipped with four main clamps with the third clamp axially moved and adjusted.
2. Removable PTFE coated heater with separate temperature control system.
3. Electric facer with reversible double cutting edge blades.
5. Be made of lightweight and high strength material; Simple structure and easy to operate.
6. Low starting pressure ensures reliable welding quality of small pipes.
7. Separate two-channel timer shows time in soaking and cooling phases.
8. High-accurate and shockproof pressure meter indicates clearer readings.
Technical specifications:
1. Welding range: 50_160mm in diameter
2. Maximum effective pulling force: 16546N
3. Facer power: 1500W 380V 50Hz
4. Heater power: 8500W 380V 50Hz
6. Temp. Deviation in surface: 170-250Â ° C Â ± 7Â ° C
The whole machine consists of machine body, hydraulic unit, facer, heater, support for heater & facer.
On request ( accessories) :
1. Flange stud end holder
2. Data logger
3. Electrical hoist
PT GOLDEN INDAH PRATAMA - group
GENERAL TRADING SUPPLIER, DISTRIBUTORS & JASA
http://youtu.be/7FiTPwqNVck
JUAL MESIN PENYAMBUNG PIPA HDPE, & FITTING
barang ( ready stock )
Kami dari PT. GOLDEN INDAH PRATAMA GROUP ( DISTRIBUTORT TUNGGAL) menjual mesin penyambung pipa HDPE yang berkualitas super, barang yang kami jual begaransi Original
MESIN PENYAMBUNG PIPA
1 HYDRAULIC BUTT FUSION WELDING MACHINE SHD 160/ 63
2 HYDRAULIC BUTT FUSION WELDING MACHINE SHD 250/ 90
Pipe Range : 3-10 Inch
3 HYDRAULIC BUTT FUSION WELDING MACHINE SHD 315/ 90
Pipe Range : 3-12 Inch
4 HYDRAULIC BUTT FUSION WELDING MACHINE SHD 450/ 200
Pipe Range : 8-18 Inch
5 HYDRAULIC BUTT FUSION WELDING MACHINE SHD 500/ 250
Pipe Range : 10-20 Inch
6 HYDRAULIC BUTT FUSION WELDING MACHINE SHD 630/ 315
Pipe Range : 12-24 Inch
7 MANUAL BUTT FUSION WELDING MACHINE SHDS 160/ 50
Type 2 Clamps ( Hand Push) Pipe Range : 2-6 inch
Type 4 Clamps ( Hand Push) Pipe Range : 2-6 inch
Type 4 Clamps ( Hand Wheel) Pipe Range : 2-6 inch
8 MANUAL BUTT FUSION WELDING MACHINE SHDS 200/ 63 Pipe Range : 2-8 inchi
Aplikasi dan Fitur:
1. Mudah diaplikasikan dan dipelajari dengan singkat
2. Di desain sedehana, mudah dibawa dan dengan bahan
baku berkualitas
3. Cocok untuk pengelasan atau penyambungan pipa plastik :
PE, PP dan PVDF
4. Cocok untuk pengerjaan penyabungan pipa dalam berbagai
kondisi medan.
5. Dilengkapi basic
plate sebagai perangkat untuk mempermudah proses
penyabungan pipa
6. Plat pemanas dengan sistem kontrol suhu yang akurat
7. Tekanan awal rendah menjamin kualitas pengelasan yang
dapat diandalkan untuk pipa ukuran kecil.
8. Posisi pengelasan dapat diganti memungkinkan untuk
mengelas berbagai alat kelengkapan pipa lebih mudah.
9. Pembacaan meteran tekanan lebih jelas dan akurat
10.Terpisah dua channel catatan waktu dalam perendaman dan
fase pendinginan
FITTING PN 16
1 TEE
TEE EQUAL PCS
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn63mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn90mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn110mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn160mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn200mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn250mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn315mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn355mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn400mm
TEE REDUCER PCS
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn110x63x110mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn110x90x110mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn160x63x160mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn160x90x160mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn160x110x160mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn200x63x200mm
( dn200x110x200mm B/ F tee fuse to dn110x63 B/ F Reducer)
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn200x90x200mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn200x110x200mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn200x160x200mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn250x63x250mm
( dn250x110x250mm B/ F tee fuse to dn110x63 B/ F Reducer)
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn250x90x250mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn250x110x250mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn250x160x250mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn250x200x250mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn315x90x315mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn315x110x315mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn315x160x315mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn315x200x315mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn315x250x315mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn355x110x355mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn355x160x355mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn355x200x355mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn355x250x355mm
Injection molding, butt fusion tee, SDR11, PE100, PN16, black, dn355x315x355mm
2 REDUCER PCS
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn110x63mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn110x90mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn160x63mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn160x90mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn160x110mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn200x90mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn200x110mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn200x160mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn250x63mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn250x110mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn250x160mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn250x200mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn315x160mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn315x200mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn315x250mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn355x250mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dn400x250mm
Injection molding, butt fusion reducer, SDR11, PE100, PN16, black, dnmm
3 STUB END PCS
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn63mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn90mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn110mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn125mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn160mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn200mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn225mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn250mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn315mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn355mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn400mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn450mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn500mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn560mm
Injection molding, butt fusion flange adapter, SDR11, PE100, PN16, black, dn360mm
4 ELBOW
ELBOW 90° PCS
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn63mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn90mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn110mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn160mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn200mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn250mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn315mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn355mm
Injection molding, butt fusion 90° elbow, SDR11, PE100, PN16, black, dn400mm
ELBOW 45° PCS
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn63mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn90mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn110mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn125mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn160mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn200mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn250mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn315mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn355mm
Injection molding, butt fusion 45° elbow, SDR11, PE100, PN16, black, dn400mm
5 EF ( ELEKTRO FUSION) PCS
EF Cap ( EF Coupler BF Cap) , PE100, SDR11, Black, dn20mm
EF Cap ( EF Coupler BF Cap) , PE100, SDR11, Black, dn32mm
EF tapping saddle, PE100, SDR11, Black, dn90* 63
6 END CAP PCS
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn32mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn40mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn50mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn63mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn75mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn90mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn110mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn125mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn160mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn200mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn225mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn250mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn315mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn355mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn400mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn450mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn500mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn560mm
Injection molding, butt fusion end cap, SDR11, PE100, PN16, black, dn630mm
7 ELECTROFUSION SADDLE
ELECTROFUSION REPAIR SADDLE PCS
Injection molding, electrofusion repair saddle, SDR11, PE100, PN16, black, dn63mm
Injection molding, electrofusion repair saddle, SDR11, PE100, PN16, black, dn90mm
Injection molding, electrofusion repair saddle, SDR11, PE100, PN16, black, dn110mm
Injection molding, electrofusion repair saddle, SDR11, PE100, PN16, black, dn160mm
Injection molding, electrofusion repair saddle, SDR11, PE100, PN16, black, dn200mm
Injection molding, electrofusion repair saddle, SDR11, PE100, PN16, black, dn250mm
ELECTROFUSION STRAIGHT SADDLE
Injection molding, electrofusion straight
saddle, SDR11, PE100, PN16, black, dn90x63mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn110x63mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn160x63mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn160x90mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn200x63mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn200x90mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn250x63mm
Injection molding, electrofusion straight saddle, SDR11, PE100, PN16, black, dn250x90mm
ELECTROFUSION TAPPING SADDLE
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn90x63mm
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn110x63mm
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn160x63mm
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn200x63mm
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn200x90mm
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn250x63mm
Injection molding, electrofusion tapping saddle, SDR11, PE100, PN16, black, dn250x90mm
kami juga PPJK di bidang Export-
- untuk mekanicsi gratis
-untuk antar area jakarta gratis
kami siap mengantar domestic antar Pulau
Demikianlah proposal kerjasama yang dapat kami Iklankan, besar harapan kami bila sudikiranya Bapak/ Ibu menjadikan kami sebagai salah satu mitra kerjasama yang baik,
Atas segala perhatian dan partisipasinya kami ucapkan terima kasih.
Hormat kami
AGUS SALIM
PT. GOLDEN INDAH PRATAMA group
Office : Jl. Otista Raya No 141 Jatinegara, Jakarta Timur
Mobile : 085260230269 / 082233651286
Pin BB : 7CC094D1
Phone : 021- 8510702
Faximil : 021- 8510691
E-mail : mesinshd_agus@yahoo.co.id
