Hygropin Proceq Moisture Meter
Spesifikasi Hygropin Proceq Moisture Meter
Detail Produk Hygropin Proceq Moisture Meter
Hygropin Proceq Moisture Meter ( CO-550.11S)
Excess moisture in concrete can be fatal to a floor covering installation. To prevent mildew and major damage, the flooring industry requires smart solutions to check surfaces for moisture prior to installing floor coverings or coatings.
The moisture meter Hygropin offers the perfect solution to identify, test and monitor moisture in concrete. Due to the small and fast moisture sensors of the humidity meter, diagnosing moisture according to ASTM F2170-09 is quicker and easier than ever before. The relative humidity test requires placing a measuring sleeve at a specific depth. This can be done either by drilling a hole or by pre-installing cast holes in fresh concrete. This moisture meter provides the smallest available sensor on the market, minimizing damage to the surface and greatly reducing the installation efforts required to obtain accurate sub-surface moisture readings.
- Depending on the settings this moisture meter is able to display relative humidity, temperature and calculated psychrometric parameters.
- Fast measuring time
- Highly integrated sensor with only 5 mm / 0.3” diameter
- Moisture meter shows trend indicators for each parameter
- The two independent sensors channels of the moisture meter can measure ambient and concrete characteristics simultaneously.
The moisture meter Hygropin can be used in dry as well as in fresh concrete.
- Drilling an 8 mm hole in the concrete is enough for placing a measuring sleeve
- The add-on for wet concrete allows pre-installation of measuring sleeves as cast holes in fresh concrete.
| Display Unit of the Moisture Meter | |
| Battery | 9 V alkaline or accumulator |
| Mains | Via USB |
| Probe input | Two separate inputs |
| Real time Clock | Yes |
| Psychrometric Calculations | Yes |
| Interface type | USB |
| Memory | Max.10’000 readings |
| Logging interval | 5 s to 1 h |
| Display | Pixel graphic LCD, backlighted |
| Display modes | % RH and temperature, date and time |
| % RH, temperature, calculated parameter | |
| Dimension | 270 x 70 x 30 mm |
| (10.63 x 2.76 x 1.17”) | |
| IP classification | IP 40 |
| In-situ probe of the Moisture Meter | |
| Measuring range | 0 to 100% RH |
| – 40 °C to 85 °C (-40 °F to 185 °F) | |
| Accuracy | ± 1.5 % RH / ± 0.3 K |
| Dimension | Ø 5 mm (Ø 0.2”) |
| Cable length | 200 cm (79”) |
Mitra Geologi
