HEATER BLADES ALAT SAMBUNG PVC WATERSTOP

Update Terakhir
07-04-2014
Dilihat Sebanyak
300 kali
Lokasi
Harga
Kontak Kami
Bagikan
+ Penawaran

Perhatian!

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi lebih aman.

Spesifikasi HEATER BLADES ALAT SAMBUNG PVC WATERSTOP

Heater blade is to be used to connect PVC Waterstop
Size of Heater Blades, 2 " ( W) x 30 " ( L) inclusive of 6 " handle for pvc waterstops jointing purposes.

Waterstop heater blade is to be used on the same waterstop profile and width. Water and non oily solvent must be used to clean the waterstop area where jointing is applied. Placed the ready heated up blade in between the two waterstops and pressed them agaisnt the hot blade.

The waterstop will melt but ensure not to the extent of burning or  charring. Removed the heater blade upward quickly and joint molten ends together quickly. Hold the two waterstop together for 20 seconds to allow the molten pvc fuse completely.

While the heater blade is still hot, clean it with the wired brush before the next jointing.
Tampilkan Lebih Banyak

Selaras Cipta Global

Sell all kinds:
PVC WATERSTOP, WATERPROOFING MEMBRANE, SWELLABLE WATERSTOP, SELF ADHESIVE MEMBRANE, BONDING AGENT, EPOXY COATING, SELF LEVELLING, EPOXY MORTAR, POLYURETHANE SEALANT, PROTECTIVE COATING, POLYURETHANE AND EPOXY INJECTION, GROUTING NON SHRINK, FLOOR HARDENER, EPOXY FLOORING, CONCRETE REPAIR, EXPANSION & CONSTRUCTION JOINTS REPAIR.


In the construction of buildings, water-resistant material ( Waterproofing) is becoming a very important necessity. Waterproofing serves as a concrete structure coating to protect the building from leaks that can be caused by hydrostatic pressure of water, the weather, the natural movement of water on the surface of concrete, in between the concretes joint, and in between the concrete with other materials.

A water-resistant material is required in almost every constructions, for example: hotels, apartments, houses and other buildings that are particularly made of concrete.

The selection of suitable water-resistant material and appropriate working methods is very important to note. Error in Waterproofing material selection will cause a variety of leakage problems. Cost for these improvements may exceed 300% of the cost of initial installation. Losses resulting from damage to equipment and supplies within the building can mount to a significant amount. Please also consider the time waste to repair the building.

Purpose & Objectives

Considering the importance waterproofing in the development of buildings, PT. Selaras Cipta Global has focused to become a specialist in the field of Waterproofing. We are committed to providing solutions and innovation in assisting our clients to prevent and deal with the problem of leakage.

In addition to producing some waterproofing material and becoming a Supplier of waterproofing products, PT Selaras Cipta Global also act as Applicator. Our specialists are always ready to provide guidance in choosing the appropriate Waterproofing material to the case at hand and its technical applications. Our company also provides waterproofing installation services with a warranty. We do this because we put quality and customer satisfaction above everything else.

Our company is ready to help you in tackling the problem of leakage in the building, from the material selection to application and /  or  installation supervision services. The implementation of these jobs are supported by our specialized personnel who are experienced in both government and private buildings.


Address   :  Ruko Taman Kebon Jeruk  Blok AA IV No: 12
                    Meruya Ilir Raya (Intercon) Jakarta Barat, Indonesia

Phone       :  (021) 585 3295 - 585 7441

Fax            :  (021) 585 3267

Email         :   selarasglobal@yahoo.com
Website    :   http://www.selarascipta.com


 Waterproofing  Products   :
   -  SCG  100  :  Acrylic Polymer   (coating system)
   -  SCG  200  :  Flexible Cementitious   (coating system) 
   -  SCG  300  :  Membrane Waterproofing  (torching  system) 
   -  SCG  350  :  Membrane Waterproofing  (self adhesive system)
   -  SCG  360  :  Coating System of  Bitumen with mineral fillers.
    -  SCG    70  :  PVC Waterstop
    -  SCG   50   :  Epoxy Mortar
    -  SCG  500  :  Floor Hardener


       * Joint Sealant                         
       * Concrete Injection                 
       * Floor Hardener                      
       * PVC Waterstop                     
       * Heating Torch & Steel Nozzle  
  
    * Heater Blades - to connect PVC Waterstops
       * Bonding Agent
      
* Epoxy Coating & Mortar

Tampilkan Lebih Banyak

Selaras Cipta Global

Free Member
 
Jl.Meruya Ilir Raya, Taman Kebon Jeruk Blok AA IV No : 12
Login Terakhir 07-04-2014
021 5853295
08161886446

Produk Lainnya


CALL
ALAT KESLING INDONESIA
CALL
ALAT KESLING INDONESIA
CALL
ALAT KESLING INDONESIA
CALL
ALAT KESLING INDONESIA
Rp. 123 / Unit
ALAT KESLING INDONESIA
Rp. 123 / Unit
ALAT KESLING INDONESIA