Compressor Danfoss Performer SZ160 T4CC

Compressor Danfoss Performer SZ160T4CC
01. Model number ( on compressor nameplate) SZ160T4CC
02. Suction connection 1-5/ 8 " ODF
03. Discharge connection 1-1/ 8 " ODF
04. Suction connection with supplied sleeve - " -
05. Discharge connection with supplied sleeve - " -
06. Oil sight glass Threaded
07. Oil equalisation connection 3/ 8' ' flare SAE
08. Oil drain connection 1/ 4' ' flare
09. LP gauge port Schrader
10. Internal pressure relief valve None
11. Cylinders -
12. Swept volume 216.6 cm3/ rev
13. Displacement at 50 Hz 37.7 m3/ h
14. Displacement at 60 Hz 45.5 m3/ h
15. Nominal speed at 50 Hz 2900 rpm
16. Nominal speed at 60 Hz 3600 rpm
17. Nominal voltage at 50 Hz 380-400V/ 3/ 50Hz
18. Nominal voltage at 60 Hz 460V/ 3/ 60Hz
19. Voltage range at 50 Hz 340-440 V
20. Voltage range at 60 Hz 414-506 V
21. Winding resistance ( between phases) 0.94 Ohm
22. Winding resistance ( between phases 1-2) 0.94 Ohm
23. Winding resistance ( between phases 1-3) 0.94 Ohm
24. Winding resistance ( between phases 2-3) 0.94 Ohm
25. Main winding resistance -
26. Start winding resistance -
27. Maximum Continuous Current ( MCC) -
28. Maximum Must Trip current ( MMT) 29 A
29. Locked Rotor Current ( LRA) 150 A
30. Motor protection Internal thermostat, ext. overload protector needed
31. Net weight 90 kg
32. Oil charge 4 litre
33. Oil type POE - 160SZ
34. Approved refrigerants R407C, R134a, R404A, R507A
35. Refrigerant charge limit 13 kg
36. Approvals ( CE) CE certified
37. Approvals ( UL) UL certified ( file SA6873)
38. Approvals ( CCC) -
39. Maximum system test pressure LP side 25 bar( g)
40. Maximum system test pressure HP side 32 bar( g)
41. Maximum differential test pressure 24 bar
42. Maximum number of starts per hour 12