Fluke 744 Documenting Process Calibrator
Perhatian!
Spesifikasi Fluke 744 Documenting Process Calibrator
- Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
- Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure to calibrate transmitters
- Power transmitters during test using loop supply with simultaneous mA measurement
- Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
- Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
- Holds up to a full week of downloaded procedures and calibration results.
- Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
- Easy to use
- Three year warranty
- Bright white dual display. Read both sourced and measured parameters simultaneously.
- Multi lingual interface
- Rechargeable NiMH battery for 10 hour uninterrupted use. Includes gas gauge.
- Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1 ms.
- Delivered with DPC/Track Sample software.
- Compatible with many Asset Management software packages.
HART Capabilities
The 744 is designed to take on nearly all the day-to-day tasks you now perform with a separate communicator. In fact, it offers the communication capabilities of the 275 HART communicator.
- Requires no external box or second tool for everyday HART calibration and maintenance.
- Offers fast HART communication.
- Supports popular models of HART transmitters, with more devise-specific command support than any other HART field calibrator.
- Works with multiple masters, burst mode, and multi-drop configurations.
- Is easy to update as additional instruments are added and new HART versions are released.
- Interrogate to determine device type, manufacturer, model, tag.
- Reconfigure the sensor mapping of dual sensor temperature transmitters.
- Read HART PV function and smart transmitter digital output while measuring analog mA output.
- Read and write HART configuration functions to make field adjustments to PV range points, damping, and other top-level configuration settings.
- Re-label smart transmitters by reading and writing to the HART tag field.
Measurement Accuracy | ||
Voltage DC | 110.000 mV | 0.025% + 0.015%1 |
1.10000 V | 0.025% + 0.005%1 | |
11.0000 V | 0.025% + 0.005%1 | |
110.000 V | 0.05% + 0.005%1 | |
300.00 V | 0.05% + 0.005%1 | |
Voltage AC | 20 to 40 Hz | 2% + 10 |
40 to 500 Hz | 0.5% + 5 | |
500 to 1 kHz | 2% + 10 | |
1 kHz to 5 kHz | 10% + 20 | |
Ranges | 1.1000, 11.000, 110.00, 300 V | |
Current DC | 30.000 mA | 0.01% + 0.015%1 |
110.00 mA | 0.01% + 0.015%1 | |
Resistance | 11.000 Ω | 0.05% + 50 mΩ |
110.00 Ω | 0.05% + 50 mΩ | |
1.1000 kΩ | 0.05% + 500 mΩ | |
11.000 kΩ | 0.1% + 10 Ω | |
Frequency | 1.00 to 109.99 Hz | 0.05 Hz |
110.0 to 1099.9 Hz | 0.5 Hz | |
1.100 to 10.999 kHz | 5 Hz | |
11.00 to 50.00 kHz | 50 Hz | |
Pressure | Accuracy | from 0.025% of range using any of 29 pressure modules. |
Modules available for differential, gauge, vacuum, absolute, dual and high pressure. (for detailed specifications refer to pressure modules in options and accessories) |
||
1. (% of reading + % of full scale) | ||
Source Accuracy | ||
Voltage DC | 110.000 mV | 0.01% + 0.005%1 |
1.10000 V | 0.01% + 0.005%1 | |
15.0000 V | 0.01% + 0.005%1 | |
Current DC | 22.000 mA (Source) | 0.01% + 0.015%1 |
22.000 mA (Simulate) | 0.02% + 0.03%1 | |
Resistance | 11.000 Ω | 0.01% + 20 mΩ |
110.00 Ω | 0.01% + 40 mΩ | |
1.1000 kΩ | 0.02% + 500 mΩ | |
11.000 kΩ | 0.03% + 5 Ω | |
Frequency | 0.00 to 10.99 Hz | 0.01 Hz |
11.00 to 109.99 Hz | 0.1 Hz | |
110.0 to 1099.9 Hz | 0.1 Hz | |
1100 to 21999 Hz | 2 Hz | |
22.000 to 50.000 kHz | 5 Hz | |
1. (% of reading + % of full scale) | ||
RTDs and Thermocouples | ||
Measure accuracy | 10 Ω Cu (427) | 2°C |
100 Ω Pt (3916) | 0.3°C | |
100 Ω Pt (3926) | 0.3°C | |
100 Ω Pt (385) | 0.3°C | |
200 Ω Pt (385) | 0.3°C | |
500 Ω Pt (385) | 0.3°C | |
1000 Ω Pt (385) | 0.3°C | |
120 Ω Ni (672) | 0.3°C | |
For 2-and 3-wire measurement, add 0.4°C | ||
E | 0.3°C | |
N | 0.5°C | |
J | 0.3°C | |
L | 0.3°C | |
K | 0.3°C | |
T | 0.3°C | |
U | 0.3°C | |
B | 0.9°C | |
R | 1.0°C | |
S | 0.9°C | |
C | 0.6°C | |
BP | 1.2°C | |
XK | 0.4°C | |
Accuracy with external cold junction, for internal junction add 0.2°C | ||
Source accuracy | 10 Ω Cu (427) | 1°C |
100 Ω Pt (3916) | 0.1°C | |
100 Ω Pt (3926) | 0.1°C | |
100 Ω Pt (385) | 0.1°C | |
200 Ω Pt (385) | 0.1°C | |
500 Ω Pt (385) | 0.1°C | |
1000 Ω Pt (385) | 0.1°C | |
120 Ω Ni (672) | 0.1°C | |
For 2-and 3-wire simulation, add 0.4°C | ||
E | 0.2°C | |
N | 0.3°C | |
J | 0.2°C | |
L | 0.2°C | |
K | 0.3°C | |
T | 0.3°C | |
U | 0.3°C | |
B | 0.8°C | |
R | 0.9°C | |
S | 0.9°C | |
C | 0.6°C | |
BP | 0.5°C | |
XK | 0.4°C | |
Accuracy with external cold junction, for internal junction add 0.2°C | ||
Technical Data | ||
Data log functions | Measure functions | Voltage, current, resistance, frequency, temperature, pressure |
Reading rate | 1, 2, 5, 10, 20, 30, or 60 readings/minute | |
Maximum record length | 8000 readings (7980 for 30 or 60 readings/minute) | |
Ramp functions | Source functions | Voltage, current, resistance, frequency, temperature |
Rate | 4 steps/second | |
Trip detect | Continuity or voltage (continuity detection not available when sourcing current) | |
Loop power function | Voltage | Selectable, 24 V or 28 V |
Accuracy | 5% | |
Maximum current | 22 mA, short circuit protected | |
Maximum input voltage | 30 V DC | |
Step functions | Source functions | Voltage, current, resistance, frequency, temperature |
Manual Step | Selectable step, change with arrow buttons | |
Autostep | Fully programmable for function, start delay, stepvalue, time per step, repeat | |
Environmental Specifications | ||
Operating temperature | -10°C to +50°C | |
-20°C to +50°C2 | ||
Storage temperature | -20°C to +60°C | |
Dust/water resistance | Meets IP52, IEC 529 | |
Operating Altitude | 2800 m | |
2. Except frequency and AC | ||
Safety Specifications | ||
Agency approvals | CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-11993 | |
Mechanical and General Specifications | ||
Size | 130 x 236 x 61 mm (5.1 x 9.3 x 2.4 in) | |
Weight | 1.4 kg (3 lbs, 1 oz) | |
Batteries | NiMH 7.2V, 3.5 Ah | |
Battery life | >10 hours typical | |
Battery replacement | Via snap-shut door without opening calibrator; no tools required | |
Side port connections | Pressure module connector | |
RS-232 connector for PC interface cable and for HART communication cable | ||
Connection for optional battery eliminator | ||
Data storage capacity | 1 week of calibration results | |
90 day specifications | The standard specification interval for the 744 is 1 and 2 years. | |
Typical 90 day measurement and source accuracy can be estimated by dividing the one year "% of reading" or "% of output" specifications by 2. |
||
Floor specifications, expressed as "% of full scale" or "counts" or "ohms" remain constant. |
DarmatekInstrument
DARMATEK berasal dari sebuah Toko yang berdiri sekitar tahun 2010 yang bergerak di bidang alat-alat safety, teknik dan elektronik.
Karena seiring dengan waktu dan perkembangan yang begitu pesat maka kami mencoba untuk memasarkan secara online berbagai Produk dan Merk di bidang Safety, Teknik, Electronic, Survey, Sirene, Laboratory, dLL. Tujuannya agar market kami dapat menjangkau seluruh wilayah Indonesia.
Toko online kami berkomitmen mengedepankan Pelayanan yang maksimal dengan melakukan efisiensi waktu, dan biaya, sehingga para konsumen tidak perlu lagi " memusingkan diri " dalam pemesanan barang. Anda pesan, harga deal, kami antar barang anda.
Kami juga menyediakan alat alat untuk keperluan Survey dan Laboratorium seperti: Total Station, Auto Level, Theodolite, Lasermeter pengukur Jarak, Teropong/ Binocullar, Nightvision, Kompas, Altimeter, Anemometer, Weather Station, Lux Meter, Thermometer Hygrometer dst dengan ditunjang merek-merek yang sudah terkenal di dunia survey seperti : TOPCON, SOKKIA, NIKON, SOUTH, HORIZON, LEICA, GARMIN, SUUNTO, BRUNTON, LUTRON, SMART SENSOR, DAVIS, LUTRON, SANFIX, PCE, SANWA, TENMARS, PCE, SEW, PROTEK, AZ INSTRUMENT, SIRINE, ATTEN, OWON, DEKKO, AMPROBE, ATAGO dan lain-lain.
Darmatek terus berupaya melakukan perbaikan dan penyempurnaan diri sebagai Wujud Partisipasi aktif untuk memajukan Industri di berbagai bidang di Indonesia dengan “ Kwalitas dan Harga terbaik”