Fluke 741B Documenting Process Calibrator

Update Terakhir

01-12-2014

Dilihat Sebanyak

183 kali

Lokasi

Harga

Kontak Kami

+ Penawaran

Perhatian!

Perusahaan ini terdaftar sebagai Free Member. Hindari melakukan pembayaran sebelum bertemu penjual atau melihat barang secara langsung. COD (Cash On Delivery) atau bertemu langsung dengan penjual merupakan metode transaksi lebih aman.

Spesifikasi Fluke 741B Documenting Process Calibrator

The 741B is easy to use with flexible test strategies. And like all Fluke tools, it's rugged, reliable and tough as nails. It's like having several powerful tools in one - so you can work faster than ever:

Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors, transmitters and other instruments
Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
Power transmitters during test using loop supply with simultaneous mA measurement
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Measure and source simultaneously with one compact, rugged, reliable tool
Create and run automated as-found/as-left procedures to satisfy quality programs or regulations. Record and document results
Use many features like autostep, custom units, user entered values during test, one-point and two-point switch testing, square root DP flow testing, programmable measurement delay etc.
Easy to use
Three year warranty
Bright white display. Read both sourced and measured parameters.
Multi lingual interface
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 1msec.

Measurement Accuracy

Voltage DC

110.000 mV	0.025%+0.015% *
1.10000 V	0.025%+0.005% *
11.0000 V	0.025%+0.005% *
110.000 V	0.05%+0.005% *
300.00 V	0.05%+0.005% *

Voltage AC

20 to 40 Hz	2% + 10
40 to 500 Hz	0.5% + 5
500 to 1 kHz	2% + 10
1 kHz to 5 kHz	10% + 20
Ranges:	1.1000, 11.000, 110.00, 300V

Current DC

30.000 mA	0.01% + 0.015% *
110.00 mA	0.01% + 0.015% *

Resistance

11.000 Ω	0.05% + 50 mΩ
110.00 Ω	0.05% + 50 mΩ
1.1000 kΩ	0.05% + 500 mΩ
11.000 kΩ	0.1% + 10 Ω

Frequency

1.00 to 109.99 Hz	0.05 Hz
110.0 to 1099.9 Hz	0.5 Hz
1.100 to 10.999 kHz	5 Hz
11.00 to 50.00 kHz	50 Hz

Pressure

Accuracy	from 0.025% of range using any of 29 pressure modules.
	(for detailed specifications refer to pressure modules in options and accessories)
	Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Note

*	(% of reading + % of full scale)

Source Accuracy

Voltage DC

110.000 mV	0.01%+0.005% *
1.10000 V	0.01%+0.005% *
15.0000 V	0.01%+0.005% *

Current DC

22.000 mA (Source)	0.01%+ 0.015% *
22.000 mA (Simulate)	0.02% + 0.03% *

Resistance

11.000 Ω	0.01% + 20 mΩ
110.00 Ω	0.01% + 40 mΩ
1.1000 kΩ	0.02% + 500 mΩ
11.000 kΩ	0.03% + 5Ω

Frequency

0.00 to 10.99 Hz	0.01 Hz
11.00 to 109.99 Hz	0.1 Hz
110.0 to 1099.9 Hz	0.1 Hz
1100 to 21999 Hz	2 Hz
22.000 to 50.000 kHz	5 Hz

Note

*	(% of reading + % of full scale)

RTDs and Thermocouples

Measure Accuracy:

10 Ω Cu (427):	2 °C
100 Ω Pt (3916):	0.3 °C
100 Ω Pt (3926):	0.3 °C
100 Ω Pt (385):	0.3 °C
200 Ω Pt (385):	0.3 °C
500 Ω Pt (385):	0.3 °C
1000 Ω Pt (385):	0.3 °C
120 Ω Ni (672):	0.3 °C
note:	For 2-and 3-wire measurement, add 0.4 °C
E:	0.3 °C
N:	0.5 °C
J:	0.3 °C
L:	0.3 °C
K:	0.3 °C
T:	0.3 °C
U:	0.3 °C
B:	0.9 °C
R:	1.0 °C
S:	0.9 °C
C:	0.6 °C
note:	Accuracy with external cold junction, for internal junction add 0.2°C

Source Accuracy:

10 Ω Cu (427):	1 °C
100 Ω Pt (3916):	0.1 °C
100 Ω Pt (3926):	0.1 °C
100 Ω Pt (385):	0.1 °C
200 Ω Pt (385):	0.1 °C
500 Ω Pt (385):	0.1 °C
1000 Ω Pt (385):	0.1 °C
120 Ω Ni (672):	0.1 °C
note:	For 2-and 3-wire simulation, add 0.4 °C
E:	0.2 °C
N:	0.3 °C
J:	0.2 °C
L:	0.2 °C
K:	0.3 °C
T:	0.3 °C
U:	0.3 °C
B:	0.8 °C
R:	0.9 °C
S:	0.9 °C
C:	0.6 °C
note:	Accuracy with external cold junction, for internal junction add 0.2 °C

Specifications

Ramp Functions

Source functions:	Voltage, current, resistance, frequency, temperature
Rate:	4 steps/second
Trip detect:	Continuity or voltage (continuity detection not available when sourcing current)

Loop Power Function

Voltage:	Selectable, 24 V or 28 V
Accuracy:	5%
Maximum current:	22 mA, short circuit protected
Maximum input voltage:	30 V DC

Step Functions

Source Functions	Voltage, current, resistance, frequency, temperature
Manual Step	Selectable step, change with arrow buttons
Autostep	Fully programmable for function, start delay, stepvalue, time per step, repeat

Environmental Specifications

Operating Temperature

	-10 °C to +50 °C
	-20 °C to +50 °C *

Storage Temperature

-20 °C to +60 °C

Dust/water resistance

Meets IP52, IEC 529

Operating Altitude

2800 m

Note

*	Except frequency and AC

Safety Specifications

Agency Approvals

CAN/CSA C22.2 No 1010.1-92, ASNI/ISA S82.01-1994, UL3111, and EN610-1:1993

Mechanical & General Specifications

Size

130 x 236 x 61 mm

Weight

1.4 kg

Batteries

NiCd:

7.2V, 1.7 Ah

Battery Life

~8 hours typical

Battery Replacement

Via snap-shut door without opening calibrator; no tools required

Side port connections

	Pressure module connector
	Connection for optional battery eliminator

Data storage capacity

1 day of calibration results

90 day specifications

	The standard specification intervals for the 741B is 1 and 2 years.
	Typical 90 day measurement and source accuracy can be estimated by
	dividing the one year "% of reading" or "%of output" specifications by 2.
	Floor specifications, expressed as "% of full scale" or
	"counts" or "ohms" remain constant.

DarmatekInstrument

DARMATEK berasal dari sebuah Toko yang berdiri sekitar tahun 2010 yang bergerak di bidang alat-alat safety, teknik dan elektronik.

Karena seiring dengan waktu dan perkembangan yang begitu pesat maka kami mencoba untuk memasarkan secara online berbagai Produk dan Merk di bidang Safety, Teknik, Electronic, Survey, Sirene, Laboratory, dLL. Tujuannya agar market kami dapat menjangkau seluruh wilayah Indonesia.

Toko online kami berkomitmen mengedepankan Pelayanan yang maksimal dengan melakukan efisiensi waktu, dan biaya, sehingga para konsumen tidak perlu lagi " memusingkan diri " dalam pemesanan barang. Anda pesan, harga deal, kami antar barang anda.

Kami juga menyediakan alat alat untuk keperluan Survey dan Laboratorium seperti: Total Station, Auto Level, Theodolite, Lasermeter pengukur Jarak, Teropong/ Binocullar, Nightvision, Kompas, Altimeter, Anemometer, Weather Station, Lux Meter, Thermometer Hygrometer dst dengan ditunjang merek-merek yang sudah terkenal di dunia survey seperti : TOPCON, SOKKIA, NIKON, SOUTH, HORIZON, LEICA, GARMIN, SUUNTO, BRUNTON, LUTRON, SMART SENSOR, DAVIS, LUTRON, SANFIX, PCE, SANWA, TENMARS, PCE, SEW, PROTEK, AZ INSTRUMENT, SIRINE, ATTEN, OWON, DEKKO, AMPROBE, ATAGO dan lain-lain.

Darmatek terus berupaya melakukan perbaikan dan penyempurnaan diri sebagai Wujud Partisipasi aktif untuk memajukan Industri di berbagai bidang di Indonesia dengan “ Kwalitas dan Harga terbaik”

DarmatekInstrument

Free Member

Jalan M.Kahfi I, Jagakarsa Jakarta Selatan

Login Terakhir 20-03-2018

+62 2171031268

081283804273 , 085774067221

Fluke 741B Documenting Process Calibrator

Perhatian!

Spesifikasi Fluke 741B Documenting Process Calibrator

DarmatekInstrument

DarmatekInstrument

Produk Lainnya

COOL BOX 142 LTR | TAHAN DINGIN SAMA

Rp. 123 / Unit

ALAT KESLING INDONESIA

TABUNG PENGUKUR KEKERUHAN LITOK-06 |

Rp. 123 / Unit

ALAT KESLING INDONESIA

COMPARATOR UNTUK MENGUKUR CHLOR | FD

Rp. 123 / Unit

ALAT KESLING INDONESIA

Temperature Meter | Temp-10 | XS Ins

Rp. 123 / Unit

ALAT KESLING INDONESIA

Boarding Kit Health Quarantine Type

Rp. 123 / Unit

ALAT KESLING INDONESIA

Boarding Kit Health Quarantine Type

Rp. 123 / Unit

ALAT KESLING INDONESIA